Section 1 - About Your Aerial Platform
SKYJACK, Page 2
SJ800 - E Series
Battery Powered
SCOPE OF THIS MANUAL
a. This manual applies to the ANSI/SIA, CSA and CE versions of the E - Series Rough Terrain aerial platform
models listed on Table 2-1a and Table 2-1b.
- Equipment identified with “ANSI” meets the ANSI SIA-A92.6-1999 standard.
- Equipment identified with “CSA” meets the CSA B354.2-01 standard.
- Equipment identified with “CE” meets the requirements for the European countries, i.e., Machinery
Directive 89/392/EEC, 98/37/EC and EMC Directive 89/336/EEC and the corresponding EN standards.
b. CSA (Canada) and CE (Europe)
Operators are required to conform to national, territorial/provincial and local health and safety regulations
applicable to the operation of this aerial platform.
c. ANSI/SIA (United States)
Operators are required by the current ANSI/SIA A92.6 standards to read and understand their RESPONSIBILITIES
in the Manual of Responsibilities before they use or operate this aerial platform.
To Next Page
Loading...
