Section 1 - About Your Aerial Platform
SKYJACK, Page 5
SJ800 - E Series
Battery Powered
Safety Precautions (Continued)
Know and understand the safety precautions before going on to next section.
• DO NOT operate on surfaces not capable of
holding the weight of the aerial platform including
the rated load, e.g. covers, drains, and trenches.
• DO NOT operate an aerial plat-
form that has ladders, scaffold-
ing or other devices mounted
on it to increase its size or work
height. It is prohibited.
• DO NOT exert side forces on
aerial platform while elevated.
• DO NOT use the aerial platform
as a crane. It is prohibited.
• DO NOT sit, stand or climb on
the guardrails. It is prohibited.
• DO NOT climb on scissor arm
assembly. It is prohibited.
• BE AWARE of overhead ob-
structions or other possible
hazards around the aerial plat-
form when driving or lifting.
• DO NOT raise the aerial plat-
form while the machine is on a
truck, fork lift or other device or
vehicle.
• BE AWARE of crushing haz-
ards. Keep all body parts in-
side platform guardrail.
• DO NOT lower the platform
unless the area below is clear
of personnel and obstruc-
tions.
• ENSURE that there are no personnel or obstruc-
tions in the path of travel, including blind spots.
• BE AWARE of blind spots when operating the
aerial platform.
• STUNT driving and horseplay are prohibited.
• ENSURE ALL tires are in good condition and lug
nuts are properly tightened.
• DO NOT alter or disable limit switches or other
safety devices.
• DO NOT use the aerial platform without guard-
rails, locking pins and the entry gate/chain/bar in
place.
• DO NOT exceed the rated capacity of the aerial
platform. Do make sure the load is evenly distrib-
uted on the platform.
To Next Page
Loading...
Need help?
General
