Skyjack SJ16 Operation Manual

31
SJ12, SJ16 213721AAA
Section 4 – Inspections Before Operation
4.1 Operator’s Responsibility
Do these tasks before each work shift and in this
sequence:
1. Visual and daily maintenance inspections
(refer to Section 4.2).
WARNING
Do an inspection on the MEWP for damage or
loose or missing parts. If damage is found, lock
and tag the MEWP and remove it from service. If
you do not obey, there is a risk of death or serious
injury.
2. Function tests (refer to Section 4.3).
Refer to Section 4.4 for a checklist of the inspection
items.
WARNING
If the MEWP is damaged or has been modied
from the initial factory-delivered condition, without
permission from Skyjack, lock and tag the MEWP.
Remove the MEWP from service. If you do not
obey, there is a risk of death or serious injury.
Repairs to the MEWP are tasks only for a qualied
service technician. Do the visual and daily
maintenance inspections and function tests again
after the repairs.
Scheduled maintenance inspections are a task only
for a qualied service technician.

Skyjack SJ16 Specifications

General

Gradeability	25%
Drive Motor	24V DC
Max Gradeability	25%
Platform Height	16 ft
Lift Capacity	500 lbs
Machine Width	0.76 m
Overall Width	0.76 m
Drive Speed (Stowed)	4.8 km/h
Drive Speed (Raised)	0.8 km/h
Turning Radius (Inside)	0 in
Power Source	24V DC Electric