EasyManuals Logo

Skyjack SJ16 Operation Manual

Skyjack SJ16
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
57
SJ12, SJ16 213721AAA
Charge the Battery Section 6 – Additional Procedures
NOTE
Many conditions have an effect on the battery
charge time. These include: the battery amp-hour
capacity, the remaining charge, the temperature,
and the condition (new, used, and defective).
More time is necessary to charge batteries that
are larger than 240 AH.
WARNING
Explosion hazard. Do not disconnect the DC
output wires near the batteries when the charger is
ON. This can cause an arc, which can then cause
the batteries to explode. You must disconnect the
AC power supply cable from its socket, and then
the charger DC connections. If you do not obey,
there is a risk of death or serious injury.
WARNING
Electrocution hazard. Do not touch parts of the
charger output wires that are not insulated, the
battery connector, or the battery terminals. If you
do not obey, there is a risk of death or serious
injury.

Table of Contents

Other manuals for Skyjack SJ16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ16 and is the answer not in the manual?

Skyjack SJ16 Specifications

General IconGeneral
Gradeability25%
Drive Motor24V DC
Max Gradeability25%
Platform Height16 ft
Lift Capacity500 lbs
Machine Width0.76 m
Overall Width0.76 m
Drive Speed (Stowed)4.8 km/h
Drive Speed (Raised)0.8 km/h
Turning Radius (Inside)0 in
Power Source24V DC Electric

Related product manuals