Need help?Do you have a question about the Skymaster DS 66 and is the answer not in the manual?
Details the operating elements and display on the receiver's front panel.
Details the input and output ports located on the back of the receiver.
Accesses the on-screen display menu for receiver settings.
Calls up the Electronic Program Guide for channel information.
Shows details like date, time, channel name, program title, and status.
Provides a daily or weekly overview of current and upcoming programs.
Managing TV channels via favourites, shifting, searching, and sorting.
Options to delete, skip, block, modify, and compile channels.
Sorting TV channels into categories (types) and groups.
Tuning the receiver to the satellite system for proper search function.
Selecting, renaming, adding, or deleting satellites.
Setting the correct LNB type for satellite reception.
Controls switching between LNB low-band and high-band.
Managing multiple LNBs and satellites using DiSEqC switches.
Selecting horizontal (H) or vertical (V) polarity for satellite signals.
Automatically searches for all available transponders of a satellite position.
Choose a satellite for automatic scan, with options to rename or delete.
Select whether to save free-to-air or encrypted channels.
Searches for a single transponder for specific channels or packages.
Choose a satellite for transponder search.
Displays transponder index and allows adding/deleting transponders.
Enter or modify the transponder frequency.
Starts search using factory default transponders.
Choose a preset satellite for the default search.
Select OSD language and preferred audio playback languages.
Choose the desired language for the on-screen display.
Tune the satellite receiver to the connected TV set.
Adjust receiver time for correct display and timer operation.
Set GMT as reference or enter time manually.
Pre-program up to eight timer events for reminders or recordings.
Adjust on-screen menu appearance, including subtitles and transparency.
Block menus and channels from unauthorized access using a password.
Provides operating voltage to the LNB for switching reception levels.
Shows details about satellite, LNB, channel, software, signal strength.
Helps align the antenna to the desired satellite using coordinates.
Resets the unit to factory default settings, erasing user changes.
Update receiver software via satellite or RS232 serial port.
Load new software using the serial port and a PC.
Update software wirelessly via satellite transmission.
Steps to resolve issues related to a lack of antenna signal.
To Next Page
General
