Page 3
CAMERA CONTROL UNIT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water. This apparatus shall not be exposed to dripping or
splashing and no objects that contain water such as vases, shall be placed on the apparatus.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacurer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or other appara-
tus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally or has been dropped. The Camera components do not
require scheduled maintenance.
The end of the useful life of the product is when the product can no longer be serviced to comply with IEC
standards as determined by a SKYTRON authorized service representative.
Ultimate disposal of this product
should be handled according to all
national laws and regulations.
To Next Page
Loading...
Need help?
General
