MN.00273.E - 004 47
In any case, for other different needs, a dedicated auxiliary port (5 pin connector) provides power supply
48Volt (see Fig.56
). For installation, please use rugged and waterproof cable.
6.4.1 PoE injector
Tab.11 - PoE injector supported
6.4.1.1 PoE injector functionality
The equipment presented in this paragraph is a SIAE IDU that provides power to the ODU ALFOplus
through the LAN cable.
SIAE Passive PoE Injector is a complete power management hot-swap with alarm indicators (over-current
protection, excess-voltage and under-voltage lockout). The Ethernet traffic from “DATA” connector (input)
is overlaid with power supply 48Volt into “DATA&Power” connector (Output). Below the details:
13 37 39
15 37 39
17 37 39
18 33.5 35
23 33.5 35
26 t.b.d. t.b.d.
32 t.b.d. t.b.d.
38 34 36
42 t.b.d. t.b.d.
Code Description
S03653 AC/DC 60W PoE injector
S03654 DC/DC 75W PoE injector
Power consumption (W)
Frequency band Typical Guaranteed
To Next Page
Loading...