MN.00273.E - 004 7
Section 1.
USER GUIDE
1 DECLARATION OF CONFORMITY
SIAE MICROELETTRONICA
Via Buonarroti, 21 - Cologno (MI) - Italy
DECLARES
THAT THE PRODUCTS
Digital Radio Relay System ALFOplus
comply with the essential requirements of article 3 of the
R&TTE Directive (1999/05/EC)
and therefore are marked:
The following standards have been applied:
IEEE 802.3 for Ethernet interface
EN 301 489-4 for EMC
EN 60950 for operator safety
EN 302 217 for digital point to point fixed radio
EN 300 132-2 characteristics of power supply
EN 300 019 climatic characteristics (in operation: class 4.1 for ODU; storing: class 1.2; transport: class
2.3)
The equipment makes use of non-harmonized frequency bands.Following the requirements
of the R&TTE Directive (article 12) and the relevant decision of the EC, in term of classifica-
tion of Radio Equipment and Telecommunications Terminal Equipment and associated iden-
tifiers, the ALFO shall carry the 'class 2' identifier:
Cologno Monzese, 17/03/2008 On behalf of SIAE MICROELETTRONICA
Chairman and Executive Officer
Alberto Mascetti
To Next Page
Loading...