Do you have a question about the SM ALFOplus and is the answer not in the manual?
Declaration of conformity for ALFOplus Digital Radio Relay System.
Essential safety rules and first aid procedures for electrical shock.
Explains the manual's objective, target audience, and overall structure.
Lists and defines acronyms used throughout the handbook.
Overview of ALFOplus system, its features, and available versions.
Outlines international standards compliance and RF channel arrangements.
Details key characteristics like Tx power, RF output attenuation, and stability.
Describes the functions of the Baseband Processor (BBP), including hardware and software components.
Details alarm processing methods, severity levels, and visual indications.
Details rate limiting and ingress filtering policies for traffic management.
Explains protocols and policies for frame discarding to prevent congestion.
Describes Ethernet OAM protocol for checking and monitoring service functionality.
Covers the overall process of installing the ALFOplus system.
Important preliminary information for qualified personnel regarding installation practices.
Provides instructions and diagrams for performing grounding connections for the system.
Details the process for installing the ODU with an integrated antenna onto a pole.
Instructions for mounting the ODU with a separated antenna onto a pole.
Describes auxiliary and Amphenol connectors for Ethernet port compatibility.
Specifies using coded connectors for electrical RJ45 connections and lists parts to be assembled.
Details optical connector characteristics, operating temperature, and protection class.
Outlines the steps for the ALFOplus system line-up process.
Lists checks to perform before switching on the ALFOplus unit.
Details the procedure for connecting a PC to ALFOplus for communication.
Guides through initial ODU programming for activating a radio link.
Explains how to optimize antenna alignment based on Rx signal power and S/N values.
Details how to access and manage local and remote ODUs using WebLCT.
Lists ALFO firmware releases and describes the software download and upgrade procedure.
Explains procedures for backing up and restoring full equipment configurations using SCT.
Describes ALFOplus alarms and loop facilities provided by the equipment.
Covers procedures for ALFOplus maintenance and troubleshooting steps.
Explains the process of locating faulty units and replacing them with spares.
Outlines the main purpose of troubleshooting and causes of alarms.
Details the programming and supervision of ALFOplus using SCT/WebLCT software.
Explains the structure for Ethernet traffic management in ALFOplus units.
Details how to access ALFOplus units using the local "Ge LAN2" with IP domain sharing.
Explains accessing ALFOplus via "Ge LAN1" using dedicated "VLAN tag" for safer management.
Explains how to restore factory default port configurations using a serial console command.
Shows available ALFOplus system versions with main specifications and characteristics.
Lists available ALFOplus versions with code, frequency, go-return, and RF subband information.
Describes the ALFOplus system installation kit for pole mounting ODU based on frequency.
Introduces the addendum document describing technical specifications for ALFOPlus system.
Details the technical specifications for the ALFOplus 11 GHz system.
Lists transmitter characteristics including maximum output power, Tx bandwidth, and frequency agility.
Details receiver characteristics such as bandwidth, noise figure, and signal-to-noise ratio.
Details the technical specifications for the ALFOplus 13 GHz system.
Details the technical specifications for the ALFOplus 15 GHz system.
Details the technical specifications for the ALFOplus 17 GHz system.
Details the technical specifications for the ALFOplus 18 GHz system.
Details the technical specifications for the ALFOplus 23 GHz system.
Lists all figures referenced within the manual.
Lists all tables referenced within the manual.
Provides information on how to obtain technical support for the product.