Assembly SMA Solar Technology AG
18 SB13_21TL-IA-IEN121060 Installation Guide
3. Mount the inverter with its upper fastening plates on
the wall mounting bracket in such a way that it
cannot slide out of the bracket sideways.
4. If a second protective conductor is required in the
country of installation, ground the inverter and fix it
securely, as described in section 5.2.3"Connecting
Additional Grounding" (page27).
5. If a second protective conductor is not required, fix
the inverter securely using the enclosed M6x12
screw.
6. Check to ensure that the inverter is securely in place.
☑ The inverter is now mounted to the wall.
To Next Page
Loading...
