Electrical Connection SMA Solar Technology AG
32 SB13_21TL-IA-IEN121060 Installation Guide
5.4.3 Opening the DC Connector
1. Unscrew the bolted connection.
2. To open the connector, insert a screwdriver into the
side catch and pry it open. For this purpose, use a
screwdriver with a width of 3.5 mm.
3. Carefully pull the DC connector apart.
4. Loosen the clamping clip. For this purpose, use a
screwdriver with a width of 3.5 mm.
5. Remove the cable.
☑ The cable is now removed from the DC connector.
To Next Page
Loading...
