Electrical Connection SMA Solar Technology AG
28 SB13_21TL-IA-IEN121060 Installation Guide
5.3 Setting the Display Language
You can set the language of the display using the switches underneath the display assembly inside
the inverter.
Procedure
1. Open the inverter as described in section 7.2"Opening the Inverter" (page39).
2. Set the switches to the required language, as
shown below.
3. Close the inverter as described in section 7.3"Closing the Inverter" (page42).
☑ The display language is set.
Language Switch S2 Switch S1
German B B
English B A
French A B
Spanish A A
To Next Page
Loading...
