Mounting
SB3000US-4000US-11-SE1607 SMA America 3-1
Section 3:
Mounting
This section provides guidelines to help you select the best mounting location,
suggestions to insure optimum performance, cautions and warnings that you should
follow to avoid injury and/or equipment damage, and step-by-step instructions for
mounting a Sunny Boy inverter.
WARNING: The Sunny Boy weighs 88 lb. (40 kg). To
avoid injury, be sure to use proper lifting techniques
and secure the help of someone to assist in the unpack-
ing and installation of the inverter.
Note: Occasionally, the rating label on the Sunny Boy will
need to be referred to. For this reason, it is required that the
inverter be mounted so that the rating label on the side of the
inverter be visible.
To Next Page
Loading...
