Mounting Mounting Procedure
3-6 SMA America SB3000US-4000US-11-SE1607
Mounting Procedure
The Sunny Boy is shipped with a T-shaped wall-mounting bracket that is suitable for
use with most walls (see
Figure 3-4 through Figure 3-6). The horizontal part of the
bracket has 10 holes, the 2 outermost holes are spaced on 16-inch centers for
mounting on wooden stud walls. Make sure that the wall you choose to mount the
Sunny Boy on is sturdy enough to support its weight (40 kg / 88 lb.) over a long
period of time and that the wall is plumb. The bracket may also be mounted on
stone, brick or solid walls. Be sure to use the appropriate type of mounting
hardware for the wall material and ensure that the hardware is no smaller than ¼“.
Figure 3-4 Sunny Boy with Mounting Bracket (stone wall mounting)
To Next Page
Loading...
