Troubleshooting SMA America, LLC
214 SI5048U-TUS121440 Technical Description
In emergency charge mode process values are displayed. Parameters cannot be changed during the
charging process. If the device is restarted, the settings that were saved before the ECM are loaded.
Premature ending of the emergency charge mode.
In order to exit the emergency charge mode early, the Sunny Island must be restarted with
the ”510.01 InvRs” parameter.
Bridge between AC1 and AC2
After emergency charge mode has been completed make sure to remove the bridge
between AC1 and AC2!
Restarting
See the instructions for restarting the device and wait 15 minutes (see also section
9.5”Reactivating the Device Following Automatic Shutdown” (page74)).
To Next Page
Loading...
