6 Mounting
SMA Solar Technology AG
Operating ManualSTPx0-3SE-40-BE-en-1034
Dimensions for mounting:
90
30.5
150
114.3
10 x 13
Ø 10
86.2
107.4
85
173 173
29.5
500
346
185
413
598
70
70
Figure 11: Position of the anchoring points(Dimensions in mm)
Recommended clearances:
If you maintain the recommended clearances, adequate heat dissipation will be ensured. Thus, you
will prevent power reduction due to excessive temperature.
☐ Maintain the recommended clearances to walls as well as to other inverters or objects.
☐ If multiple products are mounted in areas with high ambient temperatures, increase the
clearances between the products and ensure sufficient fresh-air supply. A sufficient supply of
fresh air can be ensured, for example, by an external room fan controlled via the multifunction
relay.
To Next Page
Loading...
