8 Commissioning
SMA Solar Technology AG
Operating Manual STPx0-3SE-40-BE-en-10 65
Adopting the Configuration from a File
You can adopt the inverter configuration from a file. To do this, there must be an inverter
configuration saved to a file.
Procedure:
1. Select the configuration option Adopting configuration from a file.
2. Select [Browse...] and select the desired file.
3. Select [Import file].
Configuring the Installation Assistant (Recommended)
1. Select the configuration option Configuration with Installation Assistant.
☑ The installation assistant will open.
2. Follow the installation assistant steps and make the settings appropriate for your system.
3. For every setting made in a step, select [Save and next].
☑ In the last step, all made settings are listed in a summary.
4. To correct settings you made, select [Back], navigate to the desired step, correct settings and
select [Save and continue].
5. Once all settings are correct, select [Next] in the summary.
6. To save the settings to a file, select [Export a summary] and save the file on your smart
device.
7. To export all parameters and their settings, select [Export all parameters]. This exports all
parameters and their settings into an HTML file.
☑ The start page of the user interface opens.
Manual configuration
You can configure the inverter manually by setting the desired parameters.
Procedure:
1. Select the configuration option Manual Configuration.
☑ The Device Parameters menu on the user interface will open and all available
parameter groups of the inverter will be displayed.
2. Select [Edit parameters].
3. Select the desired parameter group.
☑ All available parameters of the parameter group will be displayed.
4. Set the desired parameters.
5. Select [Save all].
☑ The inverter parameters are set.
To Next Page
Loading...
