23
The upward temperature icon starts to flash and the status graphics highlights
the temperature reached by the oven cavity. Once all of the graphic bars have been filled, a
prolonged acoustic signal informs that the temperature set has been reached inside the oven
and the upward temperature icon stops flashing.
The stabilised temperature icon appears in its place .
At this point, the oven maintains the temperature set constant inside the cavity. If
modifications are made to the temperature of the oven, the respective upward
temperature and downward temperature icons are activated.
Special functions
Start/pause functions
The key 3 START , as already described, is active after having selected a cooking function
and allows confirmation of all cooking settings in automatic programming mode; practically,
it starts cooking (START function).
The PAUSE function, represented by the icon, is always activated with key 3 START
and this can be performed with the oven in cooking mode.
The icon is fixed and the loads are off but other settings not reset.
After having confirmed any modifications to the cooking parameter and/or displayed the
cooking status, the pause must be deactivated in order to continue.
Therefore, press key 3 START again to exit the pause.
The icon is deactivated. Cooking is thus resumed and all of the automatic programming,
progressive cooking time and displays are activated.
ATTENTION: The PAUSE function does not obstruct the TIMER and ALARM CLOCK
functions , while it blocks
automatic programming of time (AUTO functions).
Furthermore, the pause function is activated automatically in the following cases:
previously confirmed cooking function change;
restore missing voltage with oven in cooking mode;
Oven light control
Switching the light on is considered a special function: it is not selected among the cooking
functions.
The light can be switched on and off any time, even with oven off using key 6 (except
when in programming phase and/or modification of a function).
In all cases, the light switches off automatically after 3 minutes.
The oven light is controlled by a micro-switch on the door, which detects opening and closing.
Opening of the door is signalled by the wording on the clock display and the light
switching on. This takes place also with the oven OFF.
If the oven is in cooking mode, opening the door deactivates the Radian Fan and the Circular
Resistance where envisioned, thus preventing the steam produced from hitting the user
directly and there is a great heat loss.
To Next Page
Loading...