SMART Board GX V2 Series - Using the remote control

Chapter 1 Welcome
smarttech.com/kb/171861 15
SMART OPS PC module
SMART Open Pluggable Specification (OPS) PC modules provide a hassle-
free Windows Pro installation based on Intel
®
Core
™
processors and are
designed specifically to work with a SMART Board interactive display. All OPS
PC modules are fully licensed with Windows Pro. Install the OPS PC module in
a display’s accessory slot to provide a complete 4K UHD Windows installation
at your fingertips, without the need for an external PC or additional cables.
Install familiar Windows applications, such as SMARTNotebook
®
,
SMARTTeamWorks
™
, and SMARTMeetingPro
®
software, and access the
internet directly through your display’s network connection. Upgrades and service for the OPS PC
module are easy to perform without removing the display from its mounting.
Stands
If you want to move the display from place to place, you can install it on a SMART mobile stand. If you
are installing the display on a wall that cannot support the display’s full weight, you can install the display
on a SMART floor stand.
Note
If you want to use the 86" model (SBID-GX186-V2) with a variety of SMART’s electric height-adjustable
stands, you must first attach a SMART wall mount (model WM-SBID-200, part #1031766,
smarttech.com/kb/171405) to the display before mounting the display to the stand. (This applies to the
FSE-400, FSE-410, and FSE-420 models of mobile stand and the WSE-400 and WSE-410 models of
wall stand).
USB extenders
As noted in the display’s specifications, the USB connection between the display and computer should be
no longer than 16'(5m). If you need to connect a computer that is more than 16' (5 m) from the display,
use the following USB extender:
Extender Specifications
USB-XT smarttech.com/kb/119318
Note
For more information about extending USB connections, see USB cable extenders.