SMART Board GX V2 Series - Chapter 2 Using basic features; Waking the display and putting it in standby

Chapter 1 Welcome
smarttech.com/kb/171861 13
Room computers and guest laptops
You can connect room computers and guest laptops to the display and view and interact with them.
The display comes with SMART software that you can install on connected computers to take full
advantage of the display’s features.
For more information, see Connecting room computers and guest laptops on page33.
Tools and features
The display’s built-in Android
™
computing provides apps that enable you to browse the web, use a
whiteboard, share your screen, and more without using a connected device.
Accessory slot
You can install an OPS-compatible device, such as a SMART OPS PC module, in the accessory slot.
SMARTOPS PC modules provide a complete Windows
®
Pro installation.
For more information about SMART OPS PC modules, see SMART OPS PC module on page15.
Caution
l
The accessory slot’s maximum available power is 100 W. The slot is not a limited power source. To
reduce the risk of fire, make sure that accessories connecting to the slot satisfy the fire enclosure
requirements of IEC 62368-1.
l
Do not remove the OPS PC or other devices from the accessory slot while they are turned on.
l
Do not install or remove the OPS PC or other devices in the accessory slot while the display is
turned on.
Identifying your specific model
SMART offers several models of the SMART Board GX (V2) series interactive displays.