SMART Board GX V2 Series - Connecting an External Display; Connecting Other Devices; Connecting USB Drives and Other Peripherals

Chapter 3 Connecting computers and other devices
smarttech.com/kb/171861 45
Connecting other devices
In addition to computers, you can connect a variety of other devices to the display:
l
USB drives and other peripherals
l
External displays
l
External audio systems
l
Room control systems
Connecting USB drives and other peripherals
The display includes two USB 3.2 Gen 1 Type-A receptacles on the front connector panel and two USB
3.2 Gen 1 Type-A receptacles on the side connector panel. You can connect USB drives, peripherals (such
as keyboards), and other devices to the USB 3.2 Gen 1 Type-A receptacles and use these devices with the
display’s embedded OS or OPS slot computer. The display’s USB 3.2 Gen 1 Type-A receptacles will switch
to the active input.
Connecting an external display
You can connect an external display using the HDMI 2.0 out connector on the connector panel.