SMART Board GX V2 Series - Page 30

Chapter 2 Installing the display
smarttech.com/kb/171861 30
Notes
l
Tap the Add Network icon to add a network manually.
l
Tap the More menu items icon ••• to access Wi-Fi preferences and see your MAC address,
IPaddress, and install certificates.
To configure network proxy settings for a secured Wi-Fi network
To improve security and privacy, or to meet company policy, you can configure a secured network proxy
for your Wi-Fi network.
1.
On the Home screen, tap the Apps icon and then tap the Settings icon > Network > Wi-Fi.
2.
Toggle the Wi-Fi switch to on and tap a secured network.
3. Choose a Security option.
4. Type your network credentials (including a network password).
5.
Ensure Advanced settings is selected.
6.
Select options as required from the Proxy and IP Settings drop-down lists.
7.
Tap Connect to save the settings.
To install a digital network certificate for a Wi-Fi network
To improve security and provide assurance of network authentication, you can install an SSL(secure
sockets layer) certificate in the display.
1.
On the Home screen, tap the Apps icon and then tap the Settings icon > Network > Wi-Fi.
2. Plug the USB drive that contains the SSL certificate into a USB port on the display.
3.
Tap the More menu items icon ••• > Wi-Fi preferences > Install certificates.
4. Browse to the certificate on the USB drive.
5.
Select the certificate. The Name the certificate dialog opens.
6. Change the name of the certificate (optional), and remember the name.
7.
Under Credential use, select Wi-Fi.
When you join Wi-Fi networks that require a certificate, you will have the option to select the installed
certificate.