Appendix B Adjusting Input settings
smarttech.com/kb/171861 90
Option Values Function Notes
Adjust
Note
The following settings apply only to VGA inputs.
H Position 1 to 100 Manually set the image’s relative
horizontal position on the display.
[N/A]
V Position 1 to 100 Manually set the image’s relative
vertical position on the display.
[N/A]
Phase 1 to 36 Adjusts the phase of the analog
video signal.
Adjusting this setting can help
compensate for indistinct colors on
analog video inputs.
AUTO PHASE [N/A] Enables the display to try to detect
the best phase setting for the current
analog video signal.
[N/A]
To Next Page
Loading...
