SMART LightRaise - Operating the SMART LightRaise Projector Mount; Interpreting the Control Panel Indicators

42 SMART LightRaise Installation and User's Guide
7
Connect the network (C11) cable extension to the computer's network connection.
8
Connect the power (P03) cable extension to the computer's power port.
To install and connect the VCR or DVD player:
1
With a right console door open, slide the VCR or DVD player into the door bracket. The
front of the unit must be facing out. The back of the unit must be at the door's hinged side.
The VCR or DVD player must be a side-loading model.
VCR or DVD Player
Right-Hand Door
NOTE:
The VCR or DVD player cables are bundled on the right door of the console. Don't
use the cables that come with your VCR or DVD player.
Power Cable
Extension
(Labeled P04)
S-Video Connector
(Labeled V06)
Power Cable
Extension
(Labeled P04)
S-Video Connector
(Labeled V06)
RCA Audio Cable
(Labeled A02)
4
2
3
2
Connect the color-coded connectors of the RCA (A02) audio cable to the Left and Right
Audio OUT ports on the VCR or DVD player.
3
Connect the S-video (V06) cable to the appropriate port on your VCR or DVD player. If
your VCR or DVD player has RCA connectors for composite video, you'll need the
RCA/S-video adapter. Use the RCA cable that comes with your equipment. Connect it to
the adapter and then to the S-video cable.
4
Obtain the country-specific power adapter from the power kit. Connect this adapter to the
power (P04) cable extension.
5
Connect the country power adapter to the VCR or DVD player's power plug.