CHAPTER 2
INSTALLING THE INTERACTIVE PEN DISPLAY
11 smarttech.com/kb/171254
l 128 MB discrete VRAM video requirements
l Other requirements: Microsoft .NET, Framework 4.5.1, Microsoft Visual Studio®, Tools for
Office, Adobe® Reader® 11.0.10 or later (for SMART Ink plugin)
NOTE
l For more information on the operating system requirements for SMART Meeting Pro
software, see the SMART Meeting Pro software release notes
(smarttech.com/SMARTMeetingProReleaseNotes).
l Operating systems and other third-party software released after this SMART software might
not be supported.
l Additional free space required during installation.
Available receptacles
NOTES
l The SMART Podium 624 interactive pen display supports DisplayPort video standards.
However, the display's video input uses a DVI-D connector, so an adapter will be required.
See the Installation best practices for SMART products (smarttech.com/kb/171035) for tips
on using these and other video adapters.
l To ensure the best image quality on the interactive pen display, set the connected
computer's display resolution settings to 1920 × 1080.
l Using a VGA cable longer than 23' (7 m) is not recommended as the video signal quality
might degrade. To extend the video signal properly, use a powered extender.
The following receptacles are required on the computer you connect to the interactive pen
display.
l DVI, VGA or HDMI video receptacle
l Available USB-A receptacle
NOTE
Some Apple® products require a USB 2.0 hub to be installed between the product's USB
3.0 port and the interactive pen display.
Video cards
The interactive pen display supports both digital (DVI) and analog (VGA) video connections. The
DVI connection typically provides the best picture quality and performance.
To Next Page
Loading...
Need help?
General
