CHAPTER 2
INSTALLING THE INTERACTIVE PEN DISPLAY
14 smarttech.com/kb/171254
Removing and installing the Smooth Tilt Stand
You can remove the interactive pen display from its stand.
CAUTION
l Before beginning, set down the interactive pen display carefully to ensure you do not
damage the buttons. Use a soft cloth or similar item to protect the display's interactive
surface.
l Do not place the interactive pen display on a surface that can mark, scratch or damage the
screen.
l The display's ventilation holes must remain at the top of the interactive pen display while it
is being used. Do not attempt to install the Smooth Tilt Stand in a position that is different
from the standard orientation.
To remove the Smooth Tilt Stand
1. Place the interactive pen display face down on a flat surface.
2. Remove the four screws that attach the stand to the VESA mount on the back of the
interactive pen display.
3. Remove the stand.
To Next Page
Loading...
