IMPORTANT INFORMATION
ii smarttech.com/kb/171254
l Use only a damp cloth or a cloth dampened with very mild detergent to clean the unit
casing or cordless pen. Do not apply paint thinner, benzene, alcohol or other solvents to the
casing. Using these cleaners, can damage the finish and also voids the warranty.
l Use only the power adapter that came with the interactive pen display. Other adapters will
not work properly, can damage the interactive pen display, and can create a fire hazard.
Using a different power adapter also voids the warranty.
l Use only the cordless pen that came with the interactive pen display. Pens or styluses from
other products can damage the screen.
l Do not use the interactive pen display in a facility control system or any other environment
that requires extremely high reliability; the interactive pen display can interfere with or
cause other electronic devices to malfunction, or other devices can interfere with or cause
the interactive pen display to malfunction. Where use is prohibited, turn off the interactive
pen display to prevent the possibility of it interfering with or causing other electronic
devices to malfunction. SMART does not accept any liability for direct or consequential
damages.
l If you transport the interactive pen display, we strongly recommend that you completely
repackage it using the original carton. The packaging was designed to provide the best
possible protection against shock and vibration. If the original carton is no longer available,
pack all components with as much padding as reasonably possible to protect the
components from excessive vibration or shock. Do not include loose components in the
packaging that could mark, scratch or otherwise damage the screen during transport.
l Put the interactive pen display down carefully to ensure you do not damage the buttons.
l Do not place the interactive pen display on a surface that will mark, scratch or damage the
screen.
l Do not place sharp or heavy objects on the interactive pen display.
l If you move the interactive pen display, adjust the stand to its full upright position, and then
use both hands to hold the display unit and the stand separately.
l Do not expose the interactive pen display to high voltage electrostatic discharges or to a
build-up of electrostatic charge on the screen. This can cause discoloration and blotches on
the screen.
l If the interactive pen display is damaged, turn off the display and disconnect the power
adapter to prevent further damage or injury.
To Next Page
Loading...
Need help?
General
