8 PARAMETER SETTING
8.1 MENU
After controller powered on, press to enter into the parameters setting menu:
1 Parameters Setting
2 Language Option
3 Controller Information
4 Fan Running Time
8.2 CONTROLLER PARAMETER SETTING
“00318” can set all items during inputting password. When default password (00318) has been
changed, if more parameter items need to be set or password is forgotten, such as sensor calibration,
please contact with the factory.
Notes: Aux. input 1-18 cannot be set as the same items, otherwise it cannot realize correct
function; programmable output 1-12 can be set as the same item.
8.3 LANUGUAGE OPTION
User may select display language as simplified Chinese and English.
8.4 CONTROLLER INFORMATION
a) This interface can display the development information of the controller, such as software version,
hardware version and release date.
b) Press to display digital input/output ports status.
c) Press to display the start interface.
8.5 FAN RUNNING TIME
The fan running time can be viewed through this item.
To Next Page
Loading...
Need help?
General
