28
Display Setup
This section allows you to activate/deactivate the following icons on
screen display:
‧
Signal Strength Indicator
‧
Time Stamp
IDLE Display
This section allows you to setup display mode during system idle. You can select Quad or Smart
Quad screen display, and the time setup for auto-scan.
Power Saving
This section allows you to setup power saving mode. There are 3 options you can setup:
‧
Enter Power Saving mode after system idle for 5 minutes.
‧
Enter Power Saving mode after system idle for 10 minutes.
‧
Screen always on (deactivate Power Saving).
Note: We suggest that enabling the power saving function.
To Next Page
Loading...
