EasyManua.ls Logo

Smartwares CS97DVR - Setting up Your Monitor

Smartwares CS97DVR
114 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Setting up your monitor
1.Insert the memory card and/or connect HDD device to USB port. It supports up to 128GB
memory card to store security video clip or copy/backup a video clip from HDD. For long term
recording video, we suggested that you connect an external HDD which supperts up to 2TB.
Suggested memory card:
a. Sandisk 128GB/class-10
b. kingston 128GB/class-10
c. Sony 128GB/class-10
d. Samsung 128GB/class-10
Note:
Make sure the monitor is power off before connecting your HDD/flash disk.
Max USB power supported to HDD/flash disk is 5V/1000mA. Please use the external
power
supply for the HDD/flash disk, if the HDD/flash disk require power supply higher than
1000mA.
Format your HDD/flash disk and/or SD card on CS97DVR first before using, following steps
as shown in "storage setup" section.
Memory Card Slot
USB Port connect to
HDD/Flash Disk

Related product manuals