FLEXIBLE ASSEMBLY SYSTEM FAS200
User Manual for FAS200 - 39 -
TECHNICAL DATA:
Dimensions:
Table of slotted aluminium, 450 x 600 mm. Height 900 mm.
Air treatment unit:
Filter to 5 µm, pressure regulator and pressure gauge.
Control panel:
Start, stop, reset pushbuttons. Emergency stop button, main switch on/off,
mode selector (auto-man) and error pilot indicator.
Composition of module manipulators:
Bearing pressing manipulation
Actuators:
- Protector: Double-acting parallel rod cylinder Ø15, Stroke: 100mm (CXSM15-
100), with flow regulators and end position detector. Controlled by 5/2 way
monostable solenoid valve.
- Pressing: Compact double-acting hydraulic cylinder Ø40, Stroke: 50mm
(CHDKGB40-50M), with flow regulators and initial-middle-end position
detectors. Controlled by 4/3 way solenoid valve, mid position A-B closed and P-
T connected.
Sensors:
- Reed type magnetic detectors (D-Z73L).
Press extraction manipulation
Actuators:
- Double-acting pusher cylinders Ø12, Stroke: 125mm (CD85N12-125A), with
flow regulators and initial-end of stroke position detectors. Controlled by 5/2 way
monostable solenoid valves.
Sensors:
- Reed type magnetic detectors (D-A73CL).
To Next Page
Loading...