FLEXIBLE ASSEMBLY SYSTEM FAS200
User Manual for FAS200 - 75 -
FAS-213 ROBOTIZED SCREWING MODULE
All the preceding modules were of a design
in which actuators based on fluid
technology predominated (pneumatics and
hydraulics). These were primarily
electropneumatic components, although the
study of electrohydraulic technology was
facilitated at the bearing pressing module.
With a view to matching the system to all
the most widely used techniques in
industrial automation, this module
introduces a new though widespread
technology, that of robotics.
Figure 78: FAS213 Robotized Screwing Module.
FUNCTION OF THE MODULE:
The operation carried out by the robot
consists of tightening the four screws fitted to
the body of the turning mechanism at the
preceding module.
Figure 79: Robot of the
Robotized Screwing
Module.
To Next Page
Loading...