FLEXIBLE ASSEMBLY SYSTEM FAS200
User Manual for FAS200 - 56 -
FAS-209 COVER CLASSIFICATION MODULE
Figure 60: FAS209 Cover
Classification Module.
FUNCTION OF THE MODULE:
The fourth of the components to be assembled in the system FAS200 is a cover
which is fitted into a housing formed on the body for this purpose. The cover
serves to retain the turning mechanism shaft mounted at the previous modules.
While the preceding modules saw the introduction of a variant in the
form of different materials for the shaft, this module increases the number of
variants by offering the choice of three different materials for the cover:
aluminium, white nylon and black nylon, in addition to a choice of two different
cover heights, giving a total of six possible combinations for this particular
assembly task.
To Next Page
Loading...