FLEXIBLE ASSEMBLY SYSTEM FAS200
User Manual for FAS200 - 94 -
The vacuum system is formed with a ejector,
element to generate a vacuum; a vacuum
switch, sensor to detect the correct level of
vacuum, enough to hand safety the
assembly; and four suction cups, final
elements act with the vacuum.
Figure 100: Ejector and vacuum switch.
• Horizontal axis:
The first operation consists of placing the vertical axis mentioned above over a
fixed pick-up point over the place where the pallet is stopped, on the belts of the
fist conveyor; and transfer the assembly to the belts of the second conveyor.
This operation is carried out by a pneumatic cylinder, a rodless cylinder.
Figure 101: Horizontal axis.
To Next Page
Loading...