SMC Networks HRSH250-W*-20 Series

HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
5.19 Anti-Snow Coverage Function HRSH Series
5-46
5.19.2 Setting/checking of anti-snow coverage function
The table below shows the set item of the anti-snow coverage function and
the default setting.
Table 5.19-1 Set item for anti-snow coverage function
Display
Item
Content
Default
Anti-snow
coverage function
Sets anti-snow coverage function
ON/OFF.
OFF
1. Press and hold the [MENU] key for approximately 2 seconds.
Repeat pressing the key until the key-lock setting screen [ ] appears on the digital
display.
Setting/Checking: Anti-snow coverage function
2. Press the [SEL] key 28 times.
Setting screen of anti-snow coverage function appears on the digital display.
3. Set the anti-snow coverage function with [▲] key or [▼] key, and press “SEL” key to
enter.
Table 5.19-2 Anti-snow coverage function setting
Set value
Explanation
Default
Anti-snow coverage function OFF
✓
Anti-snow coverage function ON
4. Press the [MENU] key once.
Returns to the main display (which shows the circulating fluid temperature).
PV
SV
PV
SV
PV
SV
PV
SV
PV
SV
Press and
hold [MENU]
key.
Press and
hold [MENU]
key.