SMC Networks HRSH250-W*-20 Series User Manual

HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
5.22 Communication Function HRSH Series
5-84
Setting/Checking: Selected alarm for contact output signal 1
49. Press the [SEL] key once.
Setting screen of selected alarm of the contact output signal 1 is displayed on the digital display.
50. Set the alarm selected for the contact output signal 1 with [▲] key or [▼] key, and
press [SEL] key to enter.
Table 5.22-26 Setting of the alarm selected for the contact output signal 1
Set value
Explanation
Default
Setting/checking is possible only when the contact
output signal 1 is set to the selected alarm status
signal output.
to
Setting of the selected alarm
Setting range: AL.01 to AL.49
Setting/Checking: Contact output signal 2 function
51. Press the [SEL] key once.
Setting screen of the contact output signal 2 function is displayed on the digital display.
PV
SV
PV
SV

SMC Networks HRSH250-W*-20 Series Specifications

General

Brand	SMC Networks
Model	HRSH250-W*-20 Series
Category	Chiller
Language	English