SMC Networks ZSE20B User Manual

-37-
No.PS※※-OMU0006-A
■[F 4] Auto-preset function
This function will automatically calculate and set the optimum pressure based on the actual operating
condition, when hysteresis mode has been selected.
<Operation>
Press the or button in function selection mode to display [F 4].
Press the button. Move on to Auto-preset function.
Press the button to set. Return to function selection mode.
[F 4] Auto-preset function completed
Press the button in measurement mode to perform the pressure setting.
Then, press the button again to change the pressure while the display is flashing.
(Refer to page 38 for details.)
Auto-preset function
Press the or button to select the auto-preset function.

SMC Networks ZSE20B Specifications

General

Brand	SMC Networks
Model	ZSE20B
Category	Switch
Language	English