SMC Networks ZSE20B User Manual

-53-
No.PS※※-OMU0006-A
●Special function setting
■[F90] Setting of all functions
All functions can be set in turn.
<Operation>
Press the or button in function selection mode to display [F90].
Press the button. Move on to setting of all functions.
[oFF] (not use) is
selected
Press the
button to set.
Return to function
selection mode.
[on](use) is selected
Setting of functions

Return to [oFF] (not used), then
press the button to set.
Return to function selection
mode.
Press the
button for 2
second or longer.
[F90] Setting of all functions completed Measurement mode
: Setting of each function
Every time the button is pressed, the display moves to the next function in order of "Setting of each function" on page 54.
Set by using the and buttons.
For details of how to set each function, refer to the relevant setting of function section in this manual.
Setting of all functions
Press the or button to select all functions.

SMC Networks ZSE20B Specifications

General

Brand	SMC Networks
Model	ZSE20B
Category	Switch
Language	English