SMC Networks ZSE20B User Manual

-50-
No.PS※※-OMU0006-A
■[F81] Security code
The security code can be turned on or off and the security code can be changed when unlocked.
<Operation>
Press the or button in function selection mode to display [F81].
Press the button. Move on to security code.
Security code checking
Press the or button to input the
security code on the sub display (right).
(The default setting is [000].)

For instructions on how to enter the security code, refer to "How to input
and change the security code" on page 64.
If the security code entered is incorrect, [FAL] will be displayed, and the
security code must be entered again.
If the wrong security code is entered 3 times, [nG] is displayed and the
device returns to function selection mode.
Move on to security code changing.
Security code
Press the or button to select the setting of security code.
[oFF] (not use) is
selected
Press the
button to return to
function selection
mode.
[on] (use) is selected
Press the button to set.
Move on to security code checking.

SMC Networks ZSE20B Specifications

General

Brand	SMC Networks
Model	ZSE20B
Category	Switch
Language	English