‐CW520/530
14
6 SET-UP
6.1 Dishwasherparametermodificationprocedure:
Onlyaccessibleafterfillingiscompleteorwiththedooropen.
Indicatorlightsshowing: off;green;orange;flashing.
Access“programmingmode”bypressingthe buttonfor
a few seconds with the appliance on with the door open
and the tank empty (after the fillingand heating phases).
The display shows UnLo1:58; when the beep sounds,
release the button and press it again at once. Keep
pressing the button again to scroll through all the
modifiableparametersinthefollowingorder:
IMPORTANT:
Wheneverthetypeofdetergentorrinseaidischanged,itisABSOLUTELYESSENTIALtoflushout
theperistalticpumpsbyplacingtheexternalintakepipesinwaterforafewcycles.
Alwaysuseonlyproductsspecificallyrecommendedforuseinadishwasher.
Failure to comply with this recommendation leads to forfeitureof thewarranty entitlement on
theappliance’swatersystem.
The internal pipes of the detergent and rinse aid pumps should be replaced by the After‐Sales
Serviceevery12monthsor15,000washcyclesandoperationofthe diaphragmcanbedisposed
ofinaccordancewiththerelevantregulationsrinseaidpumpshouldbechecked.
Set‐up
Duringfirststart‐up,thefunctions/parameterslistedbelowmustbesetoradjusted:
To Next Page
Loading...
Need help?
General
