Smeg CW520 - Energy Consumption - Display and Reset if Required; Customisation of Duration of Program P4


‐CW520/530

20
6.10 Rinseaidpump(displayandifrequiredresetduringmaintenance)

Toreset,press for3seconds.

6.11 Detergentpump(displayandifrequiredresetduringmaintenance)

Toreset,press for3seconds.

6.12 Energyconsumption–Displayandresetifrequired
Toreset,press for3seconds.
6.13 CustomisationofdurationofprogramP4.
ThedurationofprogramP4canbecustomisedfrom3to10minutes




Access the programming procedure and scroll through to
“ınF” using thebutton, then to 03:00 and press the
buttontosetthetimerequired(from3to10minutes)



After a few seconds without the user pressing any buttons,
thedisplaywillreturntothenormaloperatingstatusandthe
modificationswillbesaved.