Copyright Information
Copyright © 2011-2012 Systein Srl.
No part of this manual may be reproduced in any form or by any means (including electronic
storage and retrieval or translation into a foreign language) without prior agreement and written
consent from Systein.
Disclaimer
The material contained in this document is provided “as is”, and is subject to being changed,
without notice, in future editions. Further, to the maximum extent permitted by applicable law,
Systein disclaims all warranties, either express or implied, with regard to this manual and any
information contained herein, including but not limited to the implied warranties of merchantability
and fitness for a particular purpose. Systein shall not be liable for errors or for incidental or
consequential damages in connection with the furnishing, use, or performance of this document
or of any information contained herein. Should Systein and the user have a separate written
agreement with warranty terms covering the material in this document that conflict with these
terms, the warranty terms in the separate agreement shall control.
Whilst every effort has been made to ensure that programming algorithms are correct at the time
of their release, it is always possible that programming problems may be encountered, especially
when new devices and their associated algorithms are initially released. It is Systein’s policy to
endeavor to rectify any programming issues as quickly as possible after a validated fault report
is received.
It is recommended that high-volume users always validate that a sample of a devices has been
programmed correctly, before programming a large batch. Systein can not be held responsible
for any third party claims which arise out of the use of this programmer including ‘consequential
loss’ and ‘loss of profit’.
http://smh-tech.com.cn sales@smh-tech.com.cn +86-15250087885
To Next Page
Loading...