SMH Technologies FlashRunner Cube Series - File System Structure

FR CUBE File System
6
54
File System Structure
The files required by the instrument are organized in various folders, as
explained below:
\drivers folder: contains programming algorithms (.wnd files).
These files are provided by Systein.
\sys folder: contains systems files, such as programming licenses,
firmware files, etc.
These files are provided by Systein.
\project folder: contains programming projects (.prj files).
You create programming projects using the Project Generator
application.
\images folder: contains FR CUBE image files to be
programmed to the target (.wni files).
FR CUBE image files contain all the information needed to
program a target device memory. These files are created by the
Project Generator application.
You can create additional folders, but the four folders listed
above must always be present on the FR CUBE file system and
must not be removed. Additionally, do not remove or rename
the contents of the \SYS folder.
http://smh-tech.com.cn sales@smh-tech.com.cn +86-15250087885