FlashRunner Cube User’s Manual
2
25
Manual Project Editing
The Project file created by the Project Wizard is located, by default, in the
\Projects directory, relative to the Project Generator application location
(this location can be changed by specifying a different “workspace” path:
to do so, in the Project Generator, select Project > Edit Miscellaneous
Settings and modify the Workspace setting).
The generated project file is a text file and, if necessary, can be edited using
any text editor. Please note, however, that once the file is modified by the
user, it can be opened by the Project Generator but the Project Wizard will
not be available.
Where to Go from Here
In this chapter, you have learnt how to use the Project Generator to create
and execute a typical programming project. Additionally, FR CUBE can be
controlled in three other ways:
1. By manually sending commands and receiving answers, using
the Project Generator Terminal or any other terminal application
(for more information, see “Commands” on page 27);
2. By configuring the instrument so that it can work in standalone,
that is without a connection to a PC (for more information, see
“Standalone Mode” on page 39);
3. By building your own PC software that interfaces to the instrument
(for more information, see “FR CUBE API” on page 43).
http://smh-tech.com.cn sales@smh-tech.com.cn +86-15250087885
To Next Page
Loading...