9
Service
SERVICE CHART
Item
Maintenance Procedure
After the rst 8 operating hours
Torque the wheel lug nuts. (64-74 ft/lb (87-100 Nm))
Change the engine oil lter.
Before each use daily
Check the engine oil level.
Clean area around muer and controls.
Check the hydraulic uid level.
Check the tire pressure.
Check condition of hydraulic hoses and ttings.
Check for oil or water leaks.
Proper function of glow lamp timer.
After the rst 50 hours
Change Hydraulic Oil Filter.
Change Engine oil and lter.
Every 100 hours
Clean or change air lter.
1&2
Clean fuel lter element.
1
Lubricate machine.
Check the battery uid level and cable connections..
Check fan belt tension and damage.
Every 200 hours
Check radiator hoses and clamp bands.
Change engine oil.
1
Check idle speed.
Replace oil lter cartridge.
1
Change hydraulic oil lter.
1
Check air intake line.
1
Torque the wheel lug nuts. (64-74 ft/lb (87-100 Nm))
Every 500 hours or yearly
Clean Water Jacket and radiator interior.
Replace fan belt.
Every 800 hours
Check valve clearance.
Every 1500 hours
Check injection nozzle pressure.
Every 3000 hours
Check turbo charger.
Check injection pump.
Check injection timing.
Every 2 years
Change radiator coolant (L.L.C.)
Replace radiator hoses and clamp bands.
Replace fuel hoses and clamps.
Replace intake air lines.
1
In dusty conditions or when airborne debris is present, clean more often.
2
Replace after every 6 times of cleaning
To Next Page
Loading...
