Start up
Logon to the local station
The splash screen is followed by the login screen (see Fig. 54).
Enter your login data by using the function keys and the nav-
igator (see Fig. 55).
Important!
Inside an input field the lower-case numbers and letters
[1 abc] ... [0 _.] written above each function key are act-
ive. This gives the operator the ability to enter letters
and numbers. The numbers are used by default. To
switch between the entry of letters and numbers press
/ Q.
You can delete wrong text entries by moving the cursor
to the left using the navigator.
In the event of a failed log-in a “Login failed” message is displayed
(see Fig. 27 and Fig. 28.on page 26). In this case press
T on the
keyboard to return to the log-in screen (see Fig. 54).
After a successful login, the main screen is displayed (see Fig. 56).
Important!
One should wait 5 minutes before performing scans, as
there is a “background collection” task initiated, which
needs to be completed, to enable the system to prepare
to capture images correctly. The scanning area should
be kept clear during this time, and at all times other
than when a scan is in progress.
95591706 11/02/2010 © smiths detection proprietary information
Fig. 54: Login screen
40
Fig. 55: Function keys and navigator
Fig. 56: Local operator station's main screen
To Next Page
Loading...