Start up
Step 2:
Short press (less than one second) the subscription button on
the wireless audio base .
The subscription indicator will flash yellow and green. When
it turns to solid yellow, you will hear a tone in the master head-
set. This indicates to the master headset, that a headset wants
to join the conference.
Step 3:
Press the call control button on master headset within five
seconds to accept the conferencing request (see Fig. 67).
The headset has joined the conference.
Important!
If the call control button on the master headset isn't
pressed within five seconds the guest's request to con-
ference is rejected and they will hear an error tone in
their headset.
Adjusting the headset hearing volume
CAUTION
Risk of hearing damage!
Excessive sound volume settings or “sound-spikes” on
the audio headsets could lead to temporary or perman-
ent hearing loss.
When adjusting the volume level of your headset in-
crease the sound level in small steps. Adhere the safety
instructions of the annexed documentation “Plantronics
Savi Office W0100 – Professional Wireless Headset Sys-
tem (W01 Base + WH100 Headset) with Optional HL10
Lifter – User Guide“!
Push the call control button up/down to adjust the volume of
the headset. Tones indicate the volume level.
Important!
The headset transmit volume is set over the menu op-
tion by the PC ( 33).
95591706 11/02/2010 © smiths detection proprietary information
46
Fig. 68: Wireless audio base at the local station
Fig. 69: Adjustment of the headset volume
To Next Page
Loading...
Need help?
General