Snap-On Diagnostics DGA 1000 - Analyzer Test Menu: System Status

Analyzer Screen Display Features
2-11
5. System Status
System information about the
DGA 1000 Gas Analyzer
displays
on this screen. Only a Service Representative can modify these
items and the information may be requested when you require
service. System status information can NOT be changed by the
operator. Two menu choices are available as indicated by the
icon. The left arrow (

) returns you to the Main Test Menu.
✓
Gas tags values can be set by the operator in
Maintenance mode when customer gas cal in service
mode is set to 3gas or 4gas.
The following section details each menu selection.
It may be helpful when service is required to print the system
status using this selection.
Figure 2-11 : System Info Screen
Figure 2-12 : System Info Screen 2