2-10
Analyzer Screen Display Features
Print-out Header Set up
Enter the shop name, address, phone number, etc. to print as a
header on the test results printout.
After entering the information, press the Esc key to exit and save.
Print-out Message
Enter standard field names for the customer information you want
to use. The information entered on this screen, as shown in
Figure
2-10
, prints on the Test Results Printout. The procedure for
entering data is similar to the Print-out Header Set-up. Header
Set-up and Message Set-up need to be set only once and is then
stored in a non-volatile memory. Only four lines are allowed.
Press the Esc key to exit and save.
Figure 2-9
: Print-out Header Set-up Screen
Figure 2-10
: Print-out Message Set-up Screen
To Next Page
Loading...