104
Scope Multimeter Operations Operations
Figure 9-14 Sample grid selected
• Invert Colors—switches the screen background to white, this saves ink when printing.
Layout Settings
The selected radio knob on the Layout dialog box shows which setting is active:
• 1 Window—shows all traces on the same screen.
• 2 Windows—shows two separate horizontal traces, one below the other
• 2 Windows—shows two separate vertical traces, side-by-side.
Units Settings
The Units dialog box allows you to switch between Full Scale or Per Division settings for the trace
setup and the display settings. Selecting Full Scale configures the units to the full viewing area of
the screen, while Per Division adjusts the units to a single division (one tenth) of the screen.
Figure 9-15 Sample View Units dialog box
The selected radio knob on the Units dialog box shows which setting is active. Use the stylus to
switch between settings (Figure 9-15).
To Next Page
Loading...
